Family use electric Scooter Bike 48v electric bike

Gofunow was starting to produce last mile personal use electric vehicles, public Sharing Electric Scooters and also providing 500W Electric Scooter With Seat, 14 inch Tire Electric Scooters For Adults, 48V Battery Up To 25 Miles & 20MPH, Foldable Adult Electric Bicycles For Commuting With Basket and Shock Absorbing Seat for family use.

To ensure easy and safe use of the City Commuting Ebike, we've specially prepared this manual with which, you could understand gofunow electric scooters better. gofunow with a unique shape, advanced and reliable technology and considerate after-sales services, electric scooters and Electric Bikes is popular among users. The scooter is composed of a structure that can withstand 100,000 times of vibration, shock absorber, efficient motor and its driving system, all of which constitute leading and unique advantage of the scooter. We keep satisfying users' needs. You're much appreciated to share with us your riding feelings and opinions freely so that we can improve the product further.

Maintain the scooter regularly. Adjust scooter at a local scooter shop twice a year. Critical components shall be inspected, repaired and adjusted frequently by well-experienced operator.

*Check whether the front and rear wheel screws are tightened. 

*Check whether the tread of cover tire is worn or cracked, whether the front and rear tire pressure is suitable and whether the driving system is unblocked. 

*Check whether the joints are normal: Whether the braking wire fastener can be used in lubricating state. 

*Regularly check whether the brake functions well. Increase the braking distance on rainy/snowy days or during downhill riding. *Lubrication is an important part for maintaining an electric scooter. The front axle, center axle, flywheel and pivot point of the front fork shock absorber shall be scrubbed semiannually. Apply grease or engine oil based as required. 

*Adjustment of the brake system: Loosen the screws on the brake wire fixed seat, then tighten or loosen the brake wire, so that the average distance between the two sides of the pads and the disc is 0.3mm-0.5mm. Finally, tighten the screws